Asphalt Mixture Wheel Rut Tester (CXIS-III)
CXIS-III Asphalt Mixture Wheel Rut Tester
Â
Usage
CXIS-III Asphalt Mixture Wheel Rut Tester utilizes the advanced microprocessor control; sensor; electronic display; hydraulic pressure; mechanical finishing technologies. It is a high-tech product which integrates the electricity, machinery, hydraulic pressure into whole. It has been researched into and developed according to (T0703-93) in "Road Bitumen & Bitumen Combined Feed Experimental Rules and Regulations 052-2000". It can be used in the bitumen combined feed specimen forming in road, urban street, airport runway projects. It is applicable for bitumen combined feed physical and mechanical property experiments.
Â
| Rolling wheel radius | 500mm, width 300mm |
| Rolling wheel temperature range | room temperature ~ 200ºC, set freely |
| Bearing car moving speed | 6 times/minute (go and back) |
| Bearing car moving distance | 300mm |
| Bearing car running times  | 0~999 times (set freely) |
| Rolling wheel line pressure | 9KNÂ Â (the width of rolling wheel is 300mm, so the positive pressure should be 0-12KN adjustable) |
| Mould size | 300×300×50mm |
| Machine dimension | 200×63×136cm |
| Weight | 400Kg |
| Voltage | 380V±5%, 50Hz |
| Power | 3kW |
Â
CXIS-III Asphalt Mixture Wheel Rut Tester
Â
Usage
CXIS-III Asphalt Mixture Wheel Rut Tester utilizes the advanced microprocessor control; sensor; electronic display; hydraulic pressure; mechanical finishing technologies. It is a high-tech product which integrates the electricity, machinery, hydraulic pressure into whole. It has been researched into and developed according to (T0703-93) in "Road Bitumen & Bitumen Combined Feed Experimental Rules and Regulations 052-2000". It can be used in the bitumen combined feed specimen forming in road, urban street, airport runway projects. It is applicable for bitumen combined feed physical and mechanical property experiments.
Â
| Rolling wheel radius | 500mm, width 300mm |
| Rolling wheel temperature range | room temperature ~ 200ºC, set freely |
| Bearing car moving speed | 6 times/minute (go and back) |
| Bearing car moving distance | 300mm |
| Bearing car running times  | 0~999 times (set freely) |
| Rolling wheel line pressure | 9KNÂ Â (the width of rolling wheel is 300mm, so the positive pressure should be 0-12KN adjustable) |
| Mould size | 300×300×50mm |
| Machine dimension | 200×63×136cm |
| Weight | 400Kg |
| Voltage | 380V±5%, 50Hz |
| Power | 3kW |
Â
The vibratory hammer Pile Driver is used for Power pole digging, lamp post, Photovoltaic stent, Residential piling. The pile driver is multifunctional machine, the vibrator pile driver with front-mounted drilling function, the transport function of the loader is not damaged.
1. The vibrator hammer pile driver equipped with 20 and 30 automatic and manual gears loader.
2. The pile driver equipped with drilling machine and loader machine, the machine with large torque and flexible movement, full-time four-wheel drive design, and it is suitable for a variety of complex terrain.
3. The vibrator pile driver drilling fast, easy to operate, vertical lifting to minimize the fall of soil. The pile driver can working in loess layer, weathered rock layer, frozen soil layer, lime soil layer, sandy layer and other complex soil layers.
Vibratory Hammer Pile Driver,100 Damper Ibratory Hammer Pile Driver,Vibratory Hammer Sheet Post Pile Driver,Diesel Pile Driver With Crawler Carrier
SHANDONG HENGWANG GROUP , http://www.hwmac.com