Downspout Pipe Roll Forming Machine
Roller Stations: About 24 Steps
Coil Thickness: 0.3 - 0.8 mm
Line Speed: 12 - 15 M/Min
Trademark: TGMCO
Transport Package: Wood Box
Origin: China
Roller Stations: About 24 Steps
Coil Thickness: 0.3 - 0.8 mm
Line Speed: 12 - 15 M/Min
Trademark: TGMCO
Transport Package: Wood Box
Origin: China
A rain gutter or down spout is a narrow channel, or trough, forming the component of a roof system which collects and diverts rainwater shed by the roof. Down spout roll forming machine is the essential for its production.
Â
| Roller Stations | About 24 Steps |
| Coil Thickness | 0.3 - 0.8 mm |
| Tolerance | 3m ± 1.5 mm |
| Line Speed | 12 - 15 m/min |
| Electical Contral | PLC(Panasonic, Siemens, Yaskawa) |
| Power | 380V, 50Hz, 3Phase |
TECHNICAL SPECIFICATION
1. Roller stations: about 24 steps
2. Material of roller: Gcr15, heat treatment HRC 58-62, chrome coating
3. Main speed: 12 - 15m/min
4. Main motor power: 7.5kw
5. Diameter of roller: Ф70
6. Transmission type: chain drive, housing frame
7. Stop to cut, Post cut, Cutting tool material: Cr12, Heat treatment, Hardness: HRC 58°-60°
8. Hydraulic oil pump motor: 5.5kw
9. The pressure of hydraulic: 12Mpa
10. The material of the cutter: Cr12
11. PLC Control System: Panasonic, Siemens
12. Computer control system, Omron PLC control length, encoder: Omron
13. Dimension (L*W*H):17000mm*1200mm*1400mm
Packing & Delivery
Not only the Good Machine, but also the Most Attentive Service
Integrity Solution & Turnkey Project
Creat the Value of Steel
A rain gutter or down spout is a narrow channel, or trough, forming the component of a roof system which collects and diverts rainwater shed by the roof. Down spout roll forming machine is the essential for its production.
Â
| Roller Stations | About 24 Steps |
| Coil Thickness | 0.3 - 0.8 mm |
| Tolerance | 3m ± 1.5 mm |
| Line Speed | 12 - 15 m/min |
| Electical Contral | PLC(Panasonic, Siemens, Yaskawa) |
| Power | 380V, 50Hz, 3Phase |
TECHNICAL SPECIFICATION
1. Roller stations: about 24 steps
2. Material of roller: Gcr15, heat treatment HRC 58-62, chrome coating
3. Main speed: 12 - 15m/min
4. Main motor power: 7.5kw
5. Diameter of roller: Ф70
6. Transmission type: chain drive, housing frame
7. Stop to cut, Post cut, Cutting tool material: Cr12, Heat treatment, Hardness: HRC 58°-60°
8. Hydraulic oil pump motor: 5.5kw
9. The pressure of hydraulic: 12Mpa
10. The material of the cutter: Cr12
11. PLC Control System: Panasonic, Siemens
12. Computer control system, Omron PLC control length, encoder: Omron
13. Dimension (L*W*H):17000mm*1200mm*1400mm
Packing & Delivery
Not only the Good Machine, but also the Most Attentive Service
Integrity Solution & Turnkey Project
Creat the Value of Steel
Tractor :
Middle Tractor serise-70HP Farm Tractor, usually work for middle agriculture and farm or big agriculture and farm. Farm Tractor has enough power to work with many heavy accessories. It equip big sump, 70HP Tractor is widely used in dry field, paddy field, flat ground and hill, etc. You can choose rubber wheels and crawler belt, manual operation , easy for operate and maintenance.
70HP Tractor
70HP Tractor,70HP Tractors,70HP Farm Tractor,Middle Tractor
ZH MACHINERY , http://www.sczhmachinery.com