Investment in dense automobile industry appears Chinese-style “overcapacity”

The R&D center blossoms all over the country

Searching for "Car R&D Center" on the Internet will reveal that the full pages are "Four R&D Centers built in three years", "Three R&D Centers are completed at the same time", and "The layout of five major R&D centers in five countries" has appeared... It seems that In the past year, China’s automotive R&D center suddenly sprang up all night, blooming everywhere. It was roughly estimated that the number of new R&D centers opened in the past year has reached dozens. However, these R&D centers were built with the original intention and the efficiency of inputs and outputs. But people have to worry that it will eventually become a surplus in the auto industry.

Obvious excess of R&D institutions

On June 28, Changan Automobile officially opened its R&D center in the Nottingham Science and Technology Park in the UK. In this way, Chang’an established four institutes in just six months, and its global R&D structure has also been upgraded to “four countries and eight regions”. Expanded to “Five Countries and Nine Lands.” On July 19th, the General Motors China Forward Science and Technology Research Center, with a total investment of 150 million U.S. dollars, broke ground. Over the past year, with this “R&D” boom, China’s diverse automobile R&D centers have rapidly expanded. .

At present, domestic automotive R&D centers are broadly divided into three categories: automotive companies, research institutes, and local governments. Among them, independent brands are the most active supporters of R&D centers. In addition to Changan, in March of this year, the investment was 5 The new base of the Chery R&D Center of billions of dollars was officially launched; Geely plans to build another R&D center in Hangzhou.

In terms of multinational corporations, based on the popularity of the first R&D center, new R&D institutions are already in the pipeline, and the USD 250 million GM forward-looking technology research center was put into use at the end of last year.

At the same time, the input of local governments has also risen one after another: “In Guangxi, four major automotive R&D centers will be built in three years”, and nearly 50 R&D centers have been launched in Shanghai...

R&D centers are mostly cashed in enclosures

The new energy R&D center is the new focus of the pursuit. Among them, Guangzhou last year offered the banner of “building a world-class R&D center for new energy vehicles”; Beijing will build a world-class R&D center for electric vehicles in three years; and In Shenzhen, new energy R & D buildings in various fields, including passenger cars, have risen; the "New Energy Vehicle R&D Center" in Shanghai, Xi'an and other places has also sprung up.

Although the National Development and Reform Commission has cooled the new energy base, the R&D center as a “scientific and technological unit” has only increased. The analysis pointed out that most of the so-called “new energy R&D centers” have an entrapment policy under the stimulation of national policies. The purpose of the subsidy. Even in the world's most advanced new energy vehicle producing countries, do not need so many R & D centers, and China's new energy concept is still in its infancy.

Input and output are not proportional

Industry analysis points out that the rapid expansion of “R&D centers”, especially new energy R&D centers, has policy reasons. According to relevant notification requirements of the National Development and Reform Commission, “All new vehicle production capacity during the “Eleventh Five-year Plan” period must meet the conditions for self-developed products”. In the wave of expansion of production in 2009, this document became the main driving force behind the R&D center.

Medical Waste Treatment Machine

Background:

Medical waste with strong infections, toxic and corrosive,emissions, lax management or improper handling characteristics. It could be winnowing or failure by rain leaching, causing pollution to water body, atmosphere, soil and making direct harm to human body.

In order to ensure the medical waste is timely, efficient and harmless be disposed and to prevent the spread of disease, after years of scientific research, our company designed medical waste treatment machine, which use high temperature

disinfection and sterilization of medical waste biomass decomposition of fuel oil project, can turn a thorough treatment of medical waste, saves the cost of transportation, the landfill can also be used to create higher economic benefits.

 

End Products Usage:

1. Fuel oil  used as fuel for industries such as steel&iron factories,ceramic or chemical industries or hotels restaurants etc.

2. Carbon black  be used as garden fertilizer

3. Sync Gas     be recycled to heat machine

 

Medical Waste Treatment Machine Picture;

 Medical Waste Treatment Equipment

Medical Waste Treatment Equipment

Advantages:

1. Integrated design of reactor and base, no civil work needed to make the installation faster and easier.

 

2.Sync gas purification system is designed for developed countries which has very high environmental standard. It makes the full operation process under slightly negative pressure to ensure the safety of operation. And the system removes acid content of the sync gas to ensure the production is both clean and environmental friendly.  

 

 

3.National Patent Unique Smoke Scrubbers: More efficient removal of the acid gas 

and dust of the smoke through neutralization, purification and absorption, environmental friendly without pollution.

 

4.National Patent automatic Carbon Black Discharging System: Speedy fully 

enclosed Auto-discharging under high temperature, avoiding carbon black pollution and saving time.

 

5.Safety aspect:Production under Slightly negative pressure, automatic 

submerged welding technology, ultrasonic nondestructive testing, both manual and 

automatic safety devices.

 

Parameters:

NO.

  ITEM

Technical Parameter

1

 Door Model

 Full Open Door

2

Suitable Raw Materials

  Medical waste

3

  Structure

  Horizontal Type Revolves

4

Main Reactor Size

Φ2200*6000mm  

Φ2600*6600mm

5

 

Daily capacity

5~6MT

8-10MT

6

  Work Pressure

  Normal Pressure

7

Reactor Rotation Speed

0.4R/M

8

  Power

18-25 kw

9

Cooling Method

Cycle Water

10

Type of Drive

External Annular Gear

11

Heating Method

Direct Heating

12

Type of Installation

With Foundation

13

  Noise dB(A)

≤85

14

Operating Mode

 Intermittent Operation

15

Total Weight(MT)

25~40Mt

16

Installation Space Required

30m*10m

17

 Manpower

3~4/batch

18

  Shipment

Ф2200×6000=1*40HC+1*40FR

Ф2600×6600=2*40HC+1*40FR

 

Medical Waste Treatment Equipment

Medical Waste Treatment Equipment,Medical Waste To Oil Machine,Medical Waste Recycling

Shangqiu Jinpeng Industrial Co., Ltd. , http://www.recyclingthewaste.com