SAIC and GM team up for the first time against the public
On August 18, Shanghai Automotive and GM announced that they will jointly develop a new generation of environmentally friendly and energy-saving powertrain technology. In contrast to the Sino-foreign cooperation model in which the Chinese side copied foreign products and technologies in the past, this cooperation between SAIC and GM has risen to the level of joint development and sharing of relevant intellectual property rights globally, and the scope of cooperation is the engine, transmission, etc. that have touched the core technologies of automobiles. Powertrain. In China, this kind of cooperation is the first time.
The real "market for technology"
The products jointly developed by SAIC and GM include a compact, light-weight, direct-injection, turbocharged series engine ranging from 1L to 1.5L, as well as a matching dry, low-torque, dual-clutch automatic transmission. Compared with the traditional powertrain, the new generation powertrain provides sufficient power and is expected to reduce fuel consumption by more than 20% and carbon emissions by more than 20%. It is reported that this is the first time that Chinese auto companies have jointly developed with the international large-scale automobile group on the core technology of the powertrain and have shared intellectual property rights on a global scale. General Motors and Shanghai Automotive R&D personnel will jointly conduct research and development in Detroit and Shanghai. Joint development will fully integrate the development resources of both parties, increase development speed and reduce development costs, and will help Pan-Asia Technology Center and Shanghai Automotive's own brand technical personnel to enhance the localization R&D capabilities of the powertrain technology.
Tom Stephens, vice chairman of General Motors, said that the research results can be applied to SAIC and GM's global products. This cooperation means that SAIC and GM have further deepened their technological research and development after cooperating with production and sales in China and jointly developing new markets.
Hu Maoyuan, chairman of SAIC, believes that joint-venture vehicle companies can not only cooperate in equipment and market, but also technically. “This time we have proved this with practical actions and provided another new area of ​​cooperation for the joint venture. This is the real 'market for technology'.â€
Join forces to "fight" the public
Hu Maoyuan disclosed that the models carrying the new R&D powertrains of both parties will take about 3 years to officially launch the market. The GM's competitive TSI small-displacement engine and DSG dual-clutch transmission combination has now been fully introduced to the market, and is used in its Golf 6, Sagitar, Magotan, Long Yat, and Octavia models. Looking at it like this, GM is "slowly beaten" by the masses in terms of small-displacement power technology.
Regarding the question of whether joint operations can catch up with the public, Hu Maoyuan said: “There is an old Chinese saying that it is an afterthought. It is not that there is no advantage in starting late. I am confident that SAIC and GM will cooperate in research and development of new technologies.â€
At present, SAIC and GM have reached 9 joint ventures. In the past two years, the strategic relationship between the two sides has become more and more close. It should be said that SAIC has become an indispensable strategic partner for GM based globally.
Standard: ANSI/ASME B16.5, JIS B2220, KS B1503, EN1092-1, UNI, DIN, BS, AWWA, API, MSS, SABS, ASA, GOST standard
Method: By forging, Forged Flange , stainless Steel Flange
Pressure: 5K-30K (JIS B2220/KS B1503), 150Lbs - 2500Lbs (ANSI), PN6-PN100 (DIN, UNI, EN1092-1)
Size: 1/2"- 80", DN15-DN2000.
Type: Welded Neck, Blind, Threaded, Lap Joint, Socket Weld, SOH, SOP, Slip On (SO) FF, RF, Plate
Material: 304, 316L
Marking: On Required
Packing: Wooden Pallets
Painting: Rust-preventative oil painting or Black/yellow/varnish painting or Galvanizing
Quality control: Internal/ ISO9001, KS approval etc
Inspection: Internal / Third party
Certificate: Material certificate, Physico-chemical analysis certificate etc.
Types' Specification
Welding neck
1, Preferred for high-pressure, subzero or elevated temperature
2, Hub is tapered and bored to match pipe's inside diameter so flow is not restricted, preventing turbulence and reducing erosion
3, Easily radiographed and provides excellent stress distribution
Slip-on
1, Not normally used in high-stress applications due to low hub and weld attachment
2, Silps over outside of pipe
3, Inside of flange welded at hub and end of pipe
Lap joint
1, Used where bolt alignment or access for cleaning is required
2, Similar to slip-on flange when used with lap joint stub end
3, Radius at intersection of flange face and bore to match lap joint stub end
Threaded
1, Used where welding would would be hazardous
2, Designed for low-pressure and non-cyclic applications
3, Bore is threaded to match pipe thread
4, Tapered to seal pipe and flanges
Socket welding
1, For small-diameter chemical processes, hydraulic and stream distribution lines
2, Similar to slip-on flange
3, Counter bore matches pipe bore, allowing unrestricted flow
4, Counter bore from hub side fits pipe's outer diameter can insert pipe in socket with fillet weld at hub
Blind
1, Used to close ends of piping
2, Has no bore
3, Permits access to sealed lines
Other flanges
Orifice, Expander, Reducing, Lightweight, Studding Outlets, Long Weld Necks,Metric, Navy Drawings, Customer Drawings
FAQ:
1.Are you a trader or manufactor?
We are a manufactor (Own Forging workshop and CNC machining workshop )
2.Can your products reach to FDA , CE and 3A requirements?
Yes, all of our material can reach to the requirements of FDA, ISO and 3A Certificate).
3.We can supply:
Sanitary Butterfly Valve, Sanitary Check Valve and Diaphragm Valves, as well as Various Tank Accessories: Sight Glass, Strainers/Filter, Cleaning Ball, And other Pipe Fittings, (Pipe Unions: SMS, DIN, IDF, RJT, 3A,DS; Fittings: Ferrule,Elbow, Tee, Reducer and all other Non-standrad fittings), each products are tested well by our strictly Quality Control System, and we also have excellent service to support you and promote your business.
4.Lead Time:
For large quantity, as usual, it can be sent out within 20-40 days.
Small parcel will be dispatched by DHL, FedEx, UPS OR TNT Courier.
Big cargo will be delivered by Air freight or By Sea.
5.Our Service:
About payment:
Payment methods: L/C, T/ T, Paypal,Western Union
6.About samples:
We can provide samples production and service. Usually 2 to 5 days, the sample can be sent to your hands. We will choose the shipping way as you required: By sea, by air or by express. Any question about samples, please contact us.
7.For OEM products:
We will finish the production within 20-40 days after payment has been confirmed.
About delivery and shipping:
We will choose the delivery way as you required: By sea, by air, by express ect. Save your cost is our mission.
8.Warranty:
Any question or problem will be respond within 12 hours.
9.Lifetime service:
Any problem happened to our product, we will do our best to help client to solve it, spare parts will be half price in lifetime.
10.Problem solve:
If you can't solve the problem in your local, please delivery the product to us, we will repair it and then back to you.
11.Quality control:
All the products are calibrated with real working condition, and tested before shipping as qualified product.
12.Purpose:Attitude is everything.
Flange Bearing,Steel Flange,Forged Flange,Welding Neck Flange
Wenzhou Qili Fluid Equipment Co., Ltd. , http://www.qlssvalve.com