Performance Characteristics of CXC-06 Fiber Tester
The CXC-06 Fiber Tester is an instrument designed to determine the content of crude fiber in a substance. The CXC-06 fiber tester uses the principle of acid-alkali digestion. It uses acids, alkalis, alcohols and burning at high temperatures to remove the non-fibrous components of the material, leaving the cellulose, and then weighing. What you get is the content of crude fiber, but this is only a rough content, because there are some other things in the impurity.
Since its introduction, the CXC-06 Fiber Tester has occupied a considerable market rate. Zhejiang Top Instrument Co., Ltd. and Zhejiang University jointly researched and developed this CXC-06 coarse fiber measuring instrument. Since it was put into production, it has attracted the attention of various parties and is the focus of the market. Of course, SZF-06B fat analyzer, near-infrared soil Nutrient analyzers and other products are also the star products of Zhejiang Top, and are enjoyed by consumers.
The CXC-06 fiber measuring instrument is a fiber measuring instrument for various grains, feeds, and grains. With the deepening of the market, the CXC-06 fiber measuring instrument has also appeared in the food industry and the agricultural and sideline products industry. Because of its convenience and speed, more and more measurement institutes and even laboratories have begun to pay attention to it. When the CXC-06 fiber analyzer measures the content of crude fiber in the material, the time required is only 90 minutes, including acid treatment for 30 minutes, alkali treatment for 30 minutes, plus suction filtration and washing for about 30 minutes, for a total of about 90 minutes. And this instrument has higher repeatability error than other instruments. Crude fiber content below 10%, absolute error ≤ 0.4; crude fiber content above 10%, relative error ≤ 4%. More importantly, this instrument can measure six samples at the same time, which greatly improves the testing efficiency.
We can produce the Boiler Pipe accordng to the ASTM A335 and ASME SA335 standards, such as the P11 steel pipe, P12 steel pipe, P22
steel pipe, P91 steel pipe, P92 steel pipe, P5
steel pipe, P9 steel pipe and P36 steel pipe. Yangzhou Chengde have been sold about 700000 MT boiler pipe to the world in recent 10 years and we share the 70% of export boiler pipe in china.
In the year of 2015, we win the first prize of National Science and
Technology Progress Award by the program of [The innovative research &
development, and application of steel pipes used in 600 ℃ Ultra-super critical coal power generation unit".
YC has been granted a number of approval
certificate by international institutions, such as ASME Nuclear pipe
certificate, China Nuclear HAF certificate, 914mm Cylinder certificate, API
monogram and certificate, ISO9001 by TUV NORD, ISO14001/OHSAS18001 by CQC,
approvals from Shipping Classification Bureaus like DNV, RINA, ABS, Lloyd, GL,
Bureau Veritas, and permit of exporting to Europe as PED 2014/68/EU and AD 2000
certificates for pressure pipes, CPD (Construction Products Directive), etc. and
these certificates support the development of international sales market.
ASTM A335 Boiler Pipe
P11 Pipe,Astm A335 Pipe,P12 Pipe,P92 Pipe
YANGZHOU CHENGDE STEEL PIPE CO.,LTD , https://www.chengdepipe.com
