After the new round of "Large Excavation" after the Lanzhou Fair, the second batch of Lanzhou sewage collection project has been completed

With the approaching of the "Lanchaichui meeting" on July 6th, the first batch of sewage collection projects in Lanzhou this year has also drawn a full stop. After three and a half months of centralized excavation, the construction unit completed the first batch of excavation projects on schedule. During the "Lanxihui meeting", the construction of the sewage collection project will also be "break and rest" at a proper time. On June 28th, the reporter learned from the Lanzhou Municipal Engineering Management Office that the second round of 44-kilometer sewage collection project has been opened successively this year. In addition to the start of some sections of Anning, the downtown area will not be started during the “Lan’an Fair”. . After the “Lan’s meeting”, Lanzhou City will set off a new round of “big excavation”.
The first batch of excavation more than 95% of the project cautioned that since the full collection of 39.89 kilometers of sewage in Lanzhou City's 2010 urban area was completed on March 8th and the entire treatment project was started, the road has been “excavated” for more than 110 days. Cities where the basics of urban construction were originally weak were congested with traffic, flying dust, and the inconvenience of traveling. They also tested the mental capacity of the general public. The good news is that as of June 28, more than 95% of the first sewage collection project has been completed.
On the same day, the reporters visited Baiyin Road, Dangxidong Road, Yanchang Road, Xijin Road and Anning East Road and found that the sewage collection of these roads has been completed. The excavated road was basically restored, and the blue baffle along the line was gone. The road was restored to a long-lost patency.
The second batch of projects will not be excavated in the main urban area. “The second batch of excavation projects have also completed the bidding in succession. Apart from the main road sections of the urban areas that are not excavated during the 'Lan’Lianhui”, the surrounding remote areas will not stop, but there are One of the prerequisites is that the first batch of projects won by the construction unit will not be completed, and the second batch of projects will not be started. Now the fastest progress is made on the two roads of tranquility, and the construction of the second batch of projects will begin in the near future. The entire line will be excavated.” A person in charge of the Lanzhou Municipal Administration Office explained to reporters.
On the same day, the reporter learned from the project of the second-phase sewage collection project in Anning District that Lanfei Street and Changfeng Street in Anning District will be fully enclosed and constructed from June 29th. Traffic control has been implemented, and all passing motor vehicles pass through the West Anning Road and Xingan Road. At the same time, Zaolin Road was excavated. The public security department issued an announcement and closed the road halfway along Anning West Road to the entrance to the Botanical Garden. The east-half road only permits single-vehicle motor vehicles from south to north, and runs from north to south by motorway bypass Taolin Road and No. 512 Road. Bus routes 20 and 80 are adjusted according to the construction conditions.

Automatic Type Oil Distillation Plant

The Waste Engine Oil Distillation Plant is used to refine waste engine oil, crude oil and fuel oil after pyrolysis process into diesel grade oil, gasoline or and base oil. The daily capacity of this plant is about 5-6 tons.

 

Flow-chat of waste engine oi distillation plant

Advantage of waste engine oi distillation plant

1. Unique and original manufacturing and technology with our own formula of our equipments in China;

2. Unique horizontal design, high oil output with about 90% oil yield and 100% conversion rate, highly effective and profitable;

3. Good quality end product oil as the substitution of standard diesel oil in usage;

Automatic submerged welding technology, ultrasonic nondestructive testing, both manual and the automatic safety devices;

4. Sync gas recycling system: fully burned after recycling and utilization, saving fuel and preventing pollution;

5. National patent, unique heat insulation shell: high efficiency temperature keeping, excellent energy-saving effect;

6. High condensing efficiency condensers with more oil output. Good quality oil, longer lifetime, and easy to clean;

7. National patent water film smoke scrubbers: efficient removal of the acid gas and dust of the smoke, environmental friendly to meet related national standards.

 

Technical Parameter of Waste engine oil distillation plant

NO.	Item	Technical Parameter
1	Suitable Raw Materials	Waste engine oil, Pyrolysis fuel oil, crude oil
2	Structure	Horizontal Type
3	Capacity(24 hours)	3.5-6.5Mt
4	Work Pressure	Normal Pressure
5	Oil Yield	80%-90%
6	Power	18 kw/H
7	Cooling Method	Cycle water
8	Condensers	4 pieces of Vertical condensers
9	Emission Treatment	New DE-sulfurization Smoke Scrubbers
10	Heating Method	Hot Air
11	Type of Installation	With Foundation
12	Noise dB(A)	≤85
13	Dimension of Reactor(mm)	Ф2200×6000 Ф2500×8800
14	Operating Mode	Semi-continuous Operation
15	Main Chamber Weight (MT)	10~13Mt
16	Total Weight(MT)	25~35Mt
17	Installation Space Required	35m*15m
18	End Product	Non-standard diesel oil
19	Manpower	1~2/shift
20	Shipment Requirement	2*40HC=Ф2200×6000 1*40HC+1*40FR=Ф2500×8800

 

Automatic Type Oil Distillation Plant

Automatic Type Oil Distillation Plant,Automatic Type Waste Oil Distillation Plant,Used Engine Oil Refining Machine,Automatic Waste Oil Distillation Plant

Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclings.nl